Installing a submersible pump? Don't skip these steps 🔧💧
1️⃣ Measure borewell depth accurately
2️⃣ Check motor & fill with clean water, remove air bubbles
3️⃣ Install ~20 ft from the bottom to avoid silt damage
4️⃣ Waterproof every cable joint — it'll be fully submerged
5️⃣ Fit a check valve (NRV) to prevent backflow
6️⃣ Test motor rotation direction before final installation
Save this for your next installation — and reach out if you need guidance.
🌐 www.vrihapump.com
📧 info@vrihapump.com
#SubmersiblePump #PumpInstallation #BorewellPump #Vriha #InstallationGuide
1️⃣ Measure borewell depth accurately
2️⃣ Check motor & fill with clean water, remove air bubbles
3️⃣ Install ~20 ft from the bottom to avoid silt damage
4️⃣ Waterproof every cable joint — it'll be fully submerged
5️⃣ Fit a check valve (NRV) to prevent backflow
6️⃣ Test motor rotation direction before final installation
Save this for your next installation — and reach out if you need guidance.
🌐 www.vrihapump.com
📧 info@vrihapump.com
#SubmersiblePump #PumpInstallation #BorewellPump #Vriha #InstallationGuide
Keywords
