65x50 mm monoblock pump

Vriha VMB2.0SPDPXX6550 is a special 2 HP (1.5 kW) centrifugal monoblock pump designed to operate on both single phase and two phase (double phase) electrical supply. This dual-phase operating capability gives the pump greater flexibility compared with conventional single-phase water pumps. With a wide 140–420 V voltage range, the Vriha 2 HP pump is designed for applications where electrical supply conditions can vary and a flexible pumping solution is required. The VMB2.0SPDPXX6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size and robust Cast Iron (CI) body for dependable water pumping applications. At the specified duty point, the pump delivers 360 LPM flow at an 18 MTR head. The maximum head is 24 MTR. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance may vary depending on voltage, pipeline diameter, pipeline length, suction conditions, installation arrangement and system resistance. Vriha VMB2.0SPDPXX6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction combines the pump and motor into a compact assembly, providing a practical solution for installation and routine maintenance. This special 2 HP pump is suitable for agricultural irrigation, farm water supply, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is particularly suitable for users searching for a 2 HP single phase and two phase pump, 2 HP double phase water pump, 140–420 V wide voltage pump, 2 HP centrifugal monoblock pump or 65x50 MM water pump. Model: VMB2.0SPDPXX6550 Power: 2 HP / 1.5 kW Phase: Single Phase & Two Phase (Double Phase) Voltage Range: 140–420 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPLVXX6550 is a special 2 HP (1.5 kW) single phase centrifugal monoblock pump designed for an exceptionally wide 100–300 V voltage range. This wide voltage capability is the key feature of the model, allowing the pump to operate across low-voltage, regular-voltage and high-voltage supply conditions within its specified operating range. It is designed for customers who require a 2 HP water pump for areas where electrical voltage fluctuations are a regular operating challenge. The VMB2.0SPLVXX6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size with a robust Cast Iron (CI) body. At the specified duty point, the pump delivers 360 LPM flow at an 18 MTR head. The maximum head is 24 MTR, providing a suitable solution for water supply, agricultural irrigation, water transfer and domestic water pumping applications. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance may vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0SPLVXX6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction provides a compact pump and motor assembly for convenient installation and routine maintenance. This 2 HP wide voltage single phase pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping requirements. It is particularly suitable for users searching for a low voltage water pump, high voltage water pump, 100–300 V pump, wide voltage 2 HP pump, 2 HP single phase centrifugal pump or 65x50 MM monoblock pump. Model: VMB2.0SPLVXX6550 Power: 2 HP / 1.5 kW Phase: Single Phase Voltage Range: 100–300 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPDPE6550 is a 2 HP (1.5 kW) centrifugal monoblock pump designed to operate with both single phase and two phase electrical supply. This dual-phase capability is the key advantage of the model, providing greater flexibility for users whose available electrical supply may vary between single phase and two phase. With a 180–380 V operating range, this Vriha 2 HP pump is designed as an economical and practical solution for water supply, agricultural irrigation, water transfer and domestic water pumping applications. The VMB2.0SPDPE6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size and robust Cast Iron (CI) body. At the specified duty point, the pump delivers 270 LPM flow at a 16 MTR head and provides a maximum head of 20 MTR. The pump performance varies according to the operating head. It delivers approximately 600 LPM at 6 MTR head, 550 LPM at 8 MTR, 500 LPM at 10 MTR, 450 LPM at 12 MTR, 370 LPM at 14 MTR, 270 LPM at 16 MTR and 160 LPM at 18 MTR head. At 20 MTR head, the specified discharge is 0 LPM, representing the maximum head condition. Actual field performance may vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0SPDPE6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction combines the pump and motor in a compact assembly, making it a practical choice for installation and routine maintenance. This economical 2 HP pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is particularly suitable for customers looking for a flexible 2 HP single phase and two phase water pump, 2 HP centrifugal monoblock pump, 180–380 V pump, economy water pump or 65x50 MM monoblock pump. Model: VMB2.0SPDPE6550 Power: 2 HP / 1.5 kW Phase: Single Phase & Two Phase Voltage Range: 180–380 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 270 LPM Maximum Head: 20 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPE6550 is a 2 HP (1.5 kW) single phase centrifugal monoblock pump designed as an economical and practical solution for water supply, agricultural irrigation, water transfer and domestic water pumping applications. This Vriha 2 HP single phase water pump is developed for customers looking for a reliable centrifugal monoblock pump at a compatible and competitive price. The VMB2.0SPE6550 operates on a 170–240 V voltage range, 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size with a robust Cast Iron (CI) body. At its specified duty point, the pump delivers 270 LPM flow at a 16 MTR head, with a maximum head of 20 MTR. The pump provides different discharge capacities according to the operating head. Performance is approximately 600 LPM at 6 MTR head, 550 LPM at 8 MTR, 500 LPM at 10 MTR, 450 LPM at 12 MTR, 370 LPM at 14 MTR, 270 LPM at 16 MTR and 160 LPM at 18 MTR. The maximum head is 20 MTR. At 20 MTR head, the specified discharge is 0 LPM, indicating the maximum head condition. Actual field performance can vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0SPE6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction combines the pump and motor into a compact assembly, providing a practical solution for installation and routine water pumping requirements. This economical 2 HP single phase monoblock pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is a suitable choice for customers searching for a budget-friendly 2 HP water pump, 2 HP single phase centrifugal pump, economy monoblock pump, 170–240 V water pump or 65x50 MM centrifugal monoblock pump. Model: VMB2.0SPE6550 Power: 2 HP / 1.5 kW Phase: Single Phase Voltage Range: 170–240 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 270 LPM Maximum Head: 20 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0DPX6550 is a 2 HP (1.5 kW) two phase centrifugal monoblock pump designed for reliable water supply, agricultural irrigation, water transfer and domestic water pumping applications. The key feature of this Vriha 2 HP two phase water pump is its wide 180–415 V voltage operating range, making it suitable for applications where the available electrical voltage can vary during operation. The VMB2.0DPX6550 operates at 50 Hz frequency and 2880 RPM speed. It is designed with a 65x50 MM pump size and a robust Cast Iron (CI) body for regular and demanding water pumping applications. At the specified duty point, this 2 HP monoblock pump delivers 360 LPM flow at an 18 MTR head. The maximum head of the pump is 24 MTR, making it suitable for water transfer and water supply requirements involving moderate head and high discharge. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. Maximum head is 24 MTR. Actual field discharge can vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0DPX6550 features F Class insulation, IP44 protection and a mechanical seal for dependable pump operation. Its centrifugal monoblock construction provides a compact pump and motor assembly, helping simplify installation and routine maintenance. This 2 HP two phase centrifugal monoblock pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is a suitable choice for customers searching for a 2 HP two phase water pump, 2 HP centrifugal pump, wide voltage pump, 180–415 V water pump, 2 HP irrigation pump or 65x50 MM monoblock pump. Model: VMB2.0DPX6550 Power: 2 HP / 1.5 kW Phase: Two Phase Voltage Range: 180–415 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPLVX6550 is a 2 HP (1.5 kW) single phase centrifugal monoblock pump designed for reliable water supply, agricultural irrigation, water transfer and domestic water pumping applications. A key feature of this Vriha 2 HP single phase water pump is its 140–240 V wide voltage operating range, making it suitable for locations where supply voltage can fluctuate during normal operation. The VMB2.0SPLVX6550 operates at 50 Hz frequency and 2880 RPM speed. It is designed with a 65x50 MM pump size and a robust Cast Iron (CI) body for regular water pumping applications. At the specified duty point, the pump delivers 360 LPM discharge at an 18 MTR head, with a maximum head of 24 MTR. The hydraulic performance changes according to the operating head. The pump delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance can vary depending on pipeline length, pipe diameter, suction conditions, installation arrangement, voltage and system resistance. The Vriha 2 HP centrifugal monoblock pump features F Class insulation, IP44 protection and a mechanical seal. Its compact monoblock construction integrates the pump and motor assembly, making it convenient for installation and routine maintenance. This 2 HP single phase pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping requirements. It is a practical choice for users searching for a 2 HP single phase monoblock pump, 2 HP centrifugal water pump, wide voltage water pump, 140–240 V pump or 65x50 MM monoblock pump. Model: VMB2.0SPLVX6550 Power: 2 HP / 1.5 kW Phase: Single Phase Voltage Range: 140–240 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0TP6550 is a 2 HP (1.5 kW) three phase centrifugal monoblock pump designed for reliable and efficient water pumping, water supply, irrigation, water transfer and domestic water applications. This Vriha 2 HP three phase monoblock pump operates on a 350–415 V voltage range, 50 Hz frequency and 2880 RPM speed, making it suitable for applications requiring consistent water flow and dependable pump performance. The VMB2.0TP6550 features a 65x50 MM pump size with a robust Cast Iron (CI) body designed for regular water pumping applications. At the specified duty point, the pump delivers 360 LPM discharge at a 16 MTR head. The pump provides a maximum head of 22 MTR, offering a practical solution for water transfer and moderate-head water supply requirements. The centrifugal hydraulic design provides different discharge capacities according to operating head. The pump delivers approximately 625 LPM at 6 MTR head, 590 LPM at 8 MTR, 540 LPM at 10 MTR, 490 LPM at 12 MTR, 440 LPM at 14 MTR, 360 LPM at 16 MTR, 260 LPM at 18 MTR and 150 LPM at 20 MTR head. Actual performance may vary depending on installation conditions, pipe size, suction conditions, voltage and system resistance. The Vriha 2 HP centrifugal monoblock pump is equipped with F Class insulation and IP44 protection. A mechanical seal is provided for reliable sealing during operation. Its monoblock construction combines the pump and motor in a compact arrangement, helping simplify installation and routine maintenance. This three phase water pump can be used for agricultural irrigation, farm water supply, domestic water transfer, overhead tank filling, general water circulation and other water pumping applications. It is suitable for users looking for a 2 HP water pump, 2 HP centrifugal pump, three phase monoblock pump, agricultural water pump or 65x50 MM centrifugal monoblock pump. Model: VMB2.0TP6550 Power: 2 HP / 1.5 kW Phase: Three Phase Voltage: 350–415 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 360 LPM Maximum Head: 22 MTR Insulation: F Class Protection: IP44 Seal: Mechanical Seal

Vriha VMB2.0SPDP6550 is a 2 HP (1.5 kW) high-flow centrifugal monoblock pump designed to operate on both single phase and two phase (double phase) electrical supply. This dual-phase compatibility is a key speciality of the Vriha VMB2.0SPDP6550, making it a practical choice for water pumping applications where the available electrical supply may vary. This 2 HP single phase and two phase monoblock pump operates in a voltage range of 180-380 V, at 50 Hz frequency and 2880 RPM speed. The pump has a 65x50 MM size and a durable cast-iron (CI) body. It delivers 360 LPM at a 16 metre duty head and develops a maximum head of 22 metres. The Vriha VMB2.0SPDP6550 is designed for high water discharge at moderate pumping heads. Its performance is 625 LPM at 6 metres head, 590 LPM at 8 metres, 540 LPM at 10 metres, 490 LPM at 12 metres, 440 LPM at 14 metres and 360 LPM at the 16 metre duty head. At 18 metres head, the discharge is 260 LPM, while at 20 metres head, the discharge is 150 LPM. The maximum head is 22 metres. With 2 HP power, 65x50 MM pump size and 360 LPM discharge at 16 metres head, this Vriha high-flow monoblock pump is suitable for applications requiring a higher quantity of water at a moderate head. The pump can be used for agricultural irrigation, farm water supply, domestic water supply, water transfer, overhead tank filling, underground tank to overhead tank transfer, residential water supply, garden irrigation and general water circulation. The special single phase and two phase (double phase) operating capability makes VMB2.0SPDP6550 different from conventional single-phase or three-phase monoblock pumps. It provides greater flexibility for installations where the electrical supply configuration is not the same as a standard single-phase system. The pump is designed with F Class insulation and IP44 protection and uses a mechanical seal. The cast-iron centrifugal pump construction, 2880 RPM speed, 180-380 V operating range and 65x50 MM pump size make this model suitable for regular water supply, irrigation and water transfer requirements. Vriha VMB2.0SPDP6550 is suitable for customers searching for a 2 HP monoblock pump, 2 HP single phase pump, 2 HP two phase pump, 2 HP double phase pump, 2 HP high-flow water pump, 2 HP centrifugal pump or 360 LPM water pump. Vriha Pump supplies centrifugal monoblock pumps for agricultural, domestic and general water pumping applications in Ahmedabad, Gujarat and across India. Select the pump according to required discharge, total head, pipe size, electrical supply and application conditions. TECHNICAL SPECIFICATIONS Model: VMB2.0SPDP6550 Pump Type: Centrifugal Monoblock Pump Power: 2.0 HP (1.5 kW) Phase: Single Phase & Two Phase Voltage Range: 180-380 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 360 LPM Maximum Head: 22 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal PERFORMANCE 6 MTR – 625 LPM 8 MTR – 590 LPM 10 MTR – 540 LPM 12 MTR – 490 LPM 14 MTR – 440 LPM 16 MTR – 360 LPM 18 MTR – 260 LPM 20 MTR – 150 LPM Maximum Head – 22 MTR

Vriha VMB2.0SP6550 is a 2 HP (1.5 kW) single phase centrifugal monoblock pump designed for high-flow water supply, agricultural irrigation, water transfer and domestic water pumping applications. This 2 HP single phase monoblock pump delivers 360 LPM at a 16 metre duty head and develops a maximum head of 22 metres. The VMB2.0SP6550 operates on 170-240 V, 50 Hz supply and runs at 2880 RPM. Its 65x50 MM pump size provides high water discharge for applications where a higher flow rate is required from a 2 HP water pump. The pump has a durable cast-iron (CI) body and is designed for reliable water pumping applications. Vriha VMB2.0SP6550 provides different discharge according to the operating head. At 6 metres head, the discharge is 625 LPM; at 8 metres, 590 LPM; at 10 metres, 540 LPM; at 12 metres, 490 LPM; at 14 metres, 440 LPM; and at the 16 metre duty head, the discharge is 360 LPM. At 18 metres head, the discharge is 260 LPM, while at 20 metres it is 150 LPM. The maximum head is 22 metres. This Vriha 2 HP high-flow monoblock pump is suitable for agricultural irrigation, farm water pumping, domestic water supply, overhead tank filling, water transfer between tanks and general water circulation. The 65x50 MM centrifugal pump configuration is particularly suitable for applications where higher discharge is required at moderate pumping heads. The VMB2.0SP6550 features F Class insulation, IP44 protection and a mechanical seal. With 2 HP power, single phase operation, 170-240 V voltage range, 2880 RPM speed, 65x50 MM pump size, 16 metre duty head and 360 LPM duty discharge, this model is suitable for customers looking for a 2 HP high-flow water pump, 2 HP single phase monoblock pump or centrifugal monoblock pump. Vriha Pump supplies centrifugal monoblock pumps for agricultural, domestic and general water pumping applications in Ahmedabad, Gujarat and across India. Select the pump according to required discharge, total head, pipe size, electrical supply and application conditions. TECHNICAL SPECIFICATIONS Model: VMB2.0SP6550 Pump Type: Centrifugal Monoblock Pump Power: 2.0 HP (1.5 kW) Phase: Single Phase Voltage Range: 170-240 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 360 LPM Maximum Head: 22 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal PERFORMANCE 6 MTR – 625 LPM 8 MTR – 590 LPM 10 MTR – 540 LPM 12 MTR – 490 LPM 14 MTR – 440 LPM 16 MTR – 360 LPM 18 MTR – 260 LPM 20 MTR – 150 LPM Maximum Head – 22 MTR Vriha VMB2.0SP6550 2 HP high-flow monoblock pump is suitable for agricultural irrigation, farm water supply, field irrigation, domestic water supply, residential water pumping, overhead tank filling, underground tank to overhead tank transfer, water transfer between storage tanks, garden irrigation and general water circulation. With 360 LPM discharge at 16 metre duty head and a 65x50 MM pump size, it is suitable for applications requiring higher water flow at moderate pumping head. APPLICATIONS Agricultural Irrigation Farm Water Supply Field Irrigation Domestic Water Supply Residential Water Supply Overhead Tank Filling Underground Tank to Overhead Tank Water Transfer Between Tanks Agricultural Water Transfer Water Storage Tank Filling Bungalow and House Water Supply Society and Residential Water Supply Garden and Landscape Irrigation Small Farm Irrigation Water Circulation General Water Transfer