wide voltage pump

Vriha VMB2.0SPDPXX6550 is a special 2 HP (1.5 kW) centrifugal monoblock pump designed to operate on both single phase and two phase (double phase) electrical supply. This dual-phase operating capability gives the pump greater flexibility compared with conventional single-phase water pumps. With a wide 140–420 V voltage range, the Vriha 2 HP pump is designed for applications where electrical supply conditions can vary and a flexible pumping solution is required. The VMB2.0SPDPXX6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size and robust Cast Iron (CI) body for dependable water pumping applications. At the specified duty point, the pump delivers 360 LPM flow at an 18 MTR head. The maximum head is 24 MTR. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance may vary depending on voltage, pipeline diameter, pipeline length, suction conditions, installation arrangement and system resistance. Vriha VMB2.0SPDPXX6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction combines the pump and motor into a compact assembly, providing a practical solution for installation and routine maintenance. This special 2 HP pump is suitable for agricultural irrigation, farm water supply, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is particularly suitable for users searching for a 2 HP single phase and two phase pump, 2 HP double phase water pump, 140–420 V wide voltage pump, 2 HP centrifugal monoblock pump or 65x50 MM water pump. Model: VMB2.0SPDPXX6550 Power: 2 HP / 1.5 kW Phase: Single Phase & Two Phase (Double Phase) Voltage Range: 140–420 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPLVXX6550 is a special 2 HP (1.5 kW) single phase centrifugal monoblock pump designed for an exceptionally wide 100–300 V voltage range. This wide voltage capability is the key feature of the model, allowing the pump to operate across low-voltage, regular-voltage and high-voltage supply conditions within its specified operating range. It is designed for customers who require a 2 HP water pump for areas where electrical voltage fluctuations are a regular operating challenge. The VMB2.0SPLVXX6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size with a robust Cast Iron (CI) body. At the specified duty point, the pump delivers 360 LPM flow at an 18 MTR head. The maximum head is 24 MTR, providing a suitable solution for water supply, agricultural irrigation, water transfer and domestic water pumping applications. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance may vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0SPLVXX6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction provides a compact pump and motor assembly for convenient installation and routine maintenance. This 2 HP wide voltage single phase pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping requirements. It is particularly suitable for users searching for a low voltage water pump, high voltage water pump, 100–300 V pump, wide voltage 2 HP pump, 2 HP single phase centrifugal pump or 65x50 MM monoblock pump. Model: VMB2.0SPLVXX6550 Power: 2 HP / 1.5 kW Phase: Single Phase Voltage Range: 100–300 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPDPE6550 is a 2 HP (1.5 kW) centrifugal monoblock pump designed to operate with both single phase and two phase electrical supply. This dual-phase capability is the key advantage of the model, providing greater flexibility for users whose available electrical supply may vary between single phase and two phase. With a 180–380 V operating range, this Vriha 2 HP pump is designed as an economical and practical solution for water supply, agricultural irrigation, water transfer and domestic water pumping applications. The VMB2.0SPDPE6550 operates at 50 Hz frequency and 2880 RPM speed. It features a 65x50 MM pump size and robust Cast Iron (CI) body. At the specified duty point, the pump delivers 270 LPM flow at a 16 MTR head and provides a maximum head of 20 MTR. The pump performance varies according to the operating head. It delivers approximately 600 LPM at 6 MTR head, 550 LPM at 8 MTR, 500 LPM at 10 MTR, 450 LPM at 12 MTR, 370 LPM at 14 MTR, 270 LPM at 16 MTR and 160 LPM at 18 MTR head. At 20 MTR head, the specified discharge is 0 LPM, representing the maximum head condition. Actual field performance may vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0SPDPE6550 is equipped with F Class insulation, IP44 protection and a mechanical seal. Its centrifugal monoblock construction combines the pump and motor in a compact assembly, making it a practical choice for installation and routine maintenance. This economical 2 HP pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is particularly suitable for customers looking for a flexible 2 HP single phase and two phase water pump, 2 HP centrifugal monoblock pump, 180–380 V pump, economy water pump or 65x50 MM monoblock pump. Model: VMB2.0SPDPE6550 Power: 2 HP / 1.5 kW Phase: Single Phase & Two Phase Voltage Range: 180–380 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 16 MTR Flow at Duty: 270 LPM Maximum Head: 20 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0DPX6550 is a 2 HP (1.5 kW) two phase centrifugal monoblock pump designed for reliable water supply, agricultural irrigation, water transfer and domestic water pumping applications. The key feature of this Vriha 2 HP two phase water pump is its wide 180–415 V voltage operating range, making it suitable for applications where the available electrical voltage can vary during operation. The VMB2.0DPX6550 operates at 50 Hz frequency and 2880 RPM speed. It is designed with a 65x50 MM pump size and a robust Cast Iron (CI) body for regular and demanding water pumping applications. At the specified duty point, this 2 HP monoblock pump delivers 360 LPM flow at an 18 MTR head. The maximum head of the pump is 24 MTR, making it suitable for water transfer and water supply requirements involving moderate head and high discharge. The pump performance varies according to the operating head. It delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. Maximum head is 24 MTR. Actual field discharge can vary depending on pipeline diameter, pipeline length, suction conditions, installation arrangement, voltage and system resistance. Vriha VMB2.0DPX6550 features F Class insulation, IP44 protection and a mechanical seal for dependable pump operation. Its centrifugal monoblock construction provides a compact pump and motor assembly, helping simplify installation and routine maintenance. This 2 HP two phase centrifugal monoblock pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping applications. It is a suitable choice for customers searching for a 2 HP two phase water pump, 2 HP centrifugal pump, wide voltage pump, 180–415 V water pump, 2 HP irrigation pump or 65x50 MM monoblock pump. Model: VMB2.0DPX6550 Power: 2 HP / 1.5 kW Phase: Two Phase Voltage Range: 180–415 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPLVX6550 is a 2 HP (1.5 kW) single phase centrifugal monoblock pump designed for reliable water supply, agricultural irrigation, water transfer and domestic water pumping applications. A key feature of this Vriha 2 HP single phase water pump is its 140–240 V wide voltage operating range, making it suitable for locations where supply voltage can fluctuate during normal operation. The VMB2.0SPLVX6550 operates at 50 Hz frequency and 2880 RPM speed. It is designed with a 65x50 MM pump size and a robust Cast Iron (CI) body for regular water pumping applications. At the specified duty point, the pump delivers 360 LPM discharge at an 18 MTR head, with a maximum head of 24 MTR. The hydraulic performance changes according to the operating head. The pump delivers approximately 630 LPM at 8 MTR head, 590 LPM at 10 MTR, 550 LPM at 12 MTR, 500 LPM at 14 MTR, 440 LPM at 16 MTR, 360 LPM at 18 MTR, 240 LPM at 20 MTR and 70 LPM at 22 MTR head. The maximum head is 24 MTR. Actual field performance can vary depending on pipeline length, pipe diameter, suction conditions, installation arrangement, voltage and system resistance. The Vriha 2 HP centrifugal monoblock pump features F Class insulation, IP44 protection and a mechanical seal. Its compact monoblock construction integrates the pump and motor assembly, making it convenient for installation and routine maintenance. This 2 HP single phase pump is suitable for agricultural farms, irrigation systems, domestic water supply, water transfer, overhead tank filling and general water pumping requirements. It is a practical choice for users searching for a 2 HP single phase monoblock pump, 2 HP centrifugal water pump, wide voltage water pump, 140–240 V pump or 65x50 MM monoblock pump. Model: VMB2.0SPLVX6550 Power: 2 HP / 1.5 kW Phase: Single Phase Voltage Range: 140–240 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 65x50 MM Body Material: Cast Iron (CI) Duty Head: 18 MTR Flow at Duty: 360 LPM Maximum Head: 24 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal

Vriha VMB2.0SPDP4040 is a 2 HP (1.5 kW) centrifugal monoblock pump designed for reliable water supply, irrigation, water transfer and domestic water pumping applications. This Vriha 2 HP monoblock pump operates at 2880 RPM and is designed with a wide voltage range of 160-440 V, making it suitable for applications where supply voltage may fluctuate. Vriha VMB2.0SPDP4040 is a 2 HP (1.5 kW) wide-voltage centrifugal monoblock pump that can operate on both single-phase and two-phase (double-phase) power supply. The same pump is designed for flexible operation across a wide 160-440 V voltage range, making it a suitable 2 HP single-phase and two-phase water pump for domestic water supply, agricultural irrigation, water transfer and other general water pumping applications. The VMB2.0SPDP4040 centrifugal monoblock pump is available for single-phase and two-phase applications and uses a 40x40 MM pump size with a durable cast-iron (CI) pump body. It delivers 190 LPM at a 24 metre duty head and can develop a maximum head of 30 metres. The pump performance covers different operating heads according to water requirement. At 14 metres head, the discharge is 265 LPM; at 16 metres, 255 LPM; at 18 metres, 240 LPM; at 20 metres, 230 LPM; at 22 metres, 205 LPM; and at the 24 metre duty head, the discharge is 190 LPM. At 26 metres the discharge is 160 LPM and at 28 metres it is 130 LPM. Maximum head is 30 metres. This 2 HP Vriha monoblock water pump is suitable for domestic water supply, agricultural irrigation, farm water transfer, overhead tank filling, water transfer between tanks and general water circulation requirements. Its centrifugal monoblock construction provides a compact pump and motor arrangement for convenient installation and regular water pumping applications. Vriha VMB2.0SPDP4040 is designed with F Class insulation and IP44 protection. The pump uses a mechanical seal for dependable shaft sealing during operation. With its 2 HP motor, 160-440 V wide voltage operating range, 40x40 MM pump size, 24 metre duty head and 190 LPM duty discharge, it is suitable for customers looking for a 2 HP wide voltage monoblock pump in Ahmedabad, Gujarat and across India. Vriha Pump manufactures and supplies centrifugal monoblock pumps for domestic, agricultural and industrial water pumping applications. For correct pump selection, customers should select the model according to required head, discharge, voltage condition, pipe size and application. TECHNICAL HIGHLIGHTS Model: VMB2.0SPDP4040 Pump Type: Centrifugal Monoblock Pump Power: 2.0 HP (1.5 kW) Phase: Single Phase & Two Phase Voltage Range: 160-440 V Frequency: 50 Hz Speed: 2880 RPM Pump Size: 40x40 MM Body Material: Cast Iron (CI) Duty Head: 24 MTR Flow at Duty: 190 LPM Maximum Head: 30 MTR Insulation Class: F Class Protection: IP44 Seal Type: Mechanical Seal PERFORMANCE 14 MTR Head – 265 LPM 16 MTR Head – 255 LPM 18 MTR Head – 240 LPM 20 MTR Head – 230 LPM 22 MTR Head – 205 LPM 24 MTR Head – 190 LPM 26 MTR Head – 160 LPM 28 MTR Head – 130 LPM Maximum Head – 30 MTR APPLICATIONS Water Supply Agricultural Irrigation Farm Water Pumping Water Transfer Domestic Water Supply Overhead Tank Filling Underground Tank to Overhead Tank Water Transfer Between Tanks General Water Circulation Residential Water Pumping

Vriha VMB2.0DPX5050 is a 2 HP (1.5 kW) centrifugal monoblock pump designed specifically for Two Phase power supply, also commonly referred to as Double Phase power supply. With a wide 180–415 V voltage range, this model is developed for customers looking for a flexible two-phase water pumping solution for agricultural, irrigation, water-supply and general water-transfer applications. WIDE 180–415 V VOLTAGE RANGE The major advantage of the Vriha VMB2.0DPX5050 is its wide 180–415 V operating range. This wide voltage capability provides greater flexibility for installations where the available electrical voltage can vary. TWO PHASE / DOUBLE PHASE POWER SUPPLY VMB2.0DPX5050 is designed for Two Phase power supply. Two Phase is also commonly referred to as Double Phase in the market. This makes the model suitable for customers specifically searching for a 2 HP Two Phase Pump or 2 HP Double Phase Water Pump. 2 HP CENTRIFUGAL MONOBLOCK PUMP The VMB2.0DPX5050 is rated at 2 HP (1.5 kW) and operates at 2880 RPM. It uses a 50×50 mm pump size and robust Cast-Iron (CI) construction for dependable pumping performance. RELIABLE HEAD-FLOW PERFORMANCE The hydraulic performance of VMB2.0DPX5050 follows the performance of the Vriha 2.0 HP SPLVX5050 model. This provides the same head-flow performance while offering a different electrical configuration with Two Phase / Double Phase operation and a 180–415 V voltage range. The VMB2.0DPX5050 is designed for practical water delivery across a range of operating heads. According to the Vriha performance chart, the pump delivers approximately 430 LPM at 8 m head, 390 LPM at 10 m, 350 LPM at 12 m, 315 LPM at 14 m, 280 LPM at 16 m, 240 LPM at 18 m, 190 LPM at 20 m, and 130 LPM at 22 m head. APPLICATIONS Vriha VMB2.0DPX5050 is suitable for agricultural irrigation, farm water transfer, garden irrigation, water supply, overhead tank filling, domestic water transfer and general-purpose water pumping applications where a compatible Two Phase power supply is available. WHY CHOOSE VRIHA VMB2.0DPX5050? • 2 HP / 1.5 kW power • Two Phase / Double Phase power supply • Wide 180–415 V voltage range • 2880 RPM operation • 50×50 mm pump size • Robust Cast-Iron construction • Same hydraulic performance as 2.0 HP SPLVX5050 • Suitable for irrigation and water-supply applications • Designed for flexible electrical operating conditions Vriha VMB2.0DPX5050 is designed for customers looking for a 2 HP Two Phase or Double Phase Wide Voltage Monoblock Pump with a 180–415 V operating range and dependable water delivery performance.